Magnetodielectric and low-frequency microwave absorption properties of entropy stabilised ferrites and 3D printed composites

Abstract

High-entropy ferrites (HEFs) are a new group of high-entropy oxides with unique magnetodielectric properties that offer a wide array of possibilities for high-frequency applications. Various ions were introduced at octahedral sites in the spinel structure to test the role of the high-entropy structure’s formation on its properties. The structural analysis confirmed the formation of single-phase spinel structure even for (FeCoNiMg)(FeCr)2O4 HEF. Dielectric studies showed that introducing Mg2+ and Cr3+ ions increased electrical conductivity and dielectric losses over a wide frequency range. Low frequency (from 0.8 to 1.5 GHz) studies showed that for (FeCo)Fe2O4 and (FeCoNi)Fe2O4 ferrites reflection losses (RL) are negligible, while for both (FeCoNiMg)Fe2O4 and (FeCoNiMg)( FeCr)2O4 ferrites RL higher than 90% were observed. The temperature dependence on the absorption properties was confirmed for (FeCoNiMg)(FeCr)2O4 HEF. The highest absorption window was observed for 343 K, for which RL higher than 90% appears from 1.25 to 1.5 GHz. The possibility of the 3D printing of microwave absorption composites from HEFs was also tested. It was confirmed that the addition of (FeCoNiMg)(FeCr)2O4 HEF drastically increases the absorption properties up to 85.5% at 2.72 GHz for the absorber with the same thickness as made from the pure acrylonitrile butadiene styrene (ABS). Interestingly, the EMI shielding properties of these composites are mainly related to the dielectric losses improved by the addition of entropy stabilised ferrites in 3D printed composites with various ferrite concentrations.